Home / Self-Leveling Compound Under-layment SLU-925

Self-Leveling Compound Under-layment SLU-925

Customize your products in every detail, we provide customized service for you. If you have any requirements on the shape, dimensions, function, or other aspects of your products, or if you have any new creative products to be developed, you can contact our team and we will work out the most cost-effective production plan for you.
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Self-Leveling Underlayment ScreedSLU-925

    Product Description

    EasyMix Self-Leveling Underlayment Screed is a cement-based self-leveling mortar formulated and produced with special cement, graded fillers, inorganic additives, and polymer additives. It features excellent fluidity and high early strength.It offers excellent flowability, low shrinkage, strong adhesion, as well as high adhesion to compression and

    Uses

    Suitable for substrate leveling and surface preparation such as laminate flooring installation, PVC flooring installation, carpet installation, etc.

    Advantages

    1.Suitable for leveling various indoor substrates such as concrete, mortar, existing ceramic tiles, etc.
    2.Excellent fluidity ensures simple and rapid application.
    3.High early strength and fast drying for efficient construction
    4.Low shrinkage with superior bonding performance

    Specification & Technical data : JC/T 985-2017 / EN13813

    Product Characteristics
    JC/T 985
    Initial flow rate
    ≥130
    142
    20min flow rate
    ≥130
    136
    Tensile adhesion strength
    ≥1.0
    1.1
    Dimensional change rate
    -0.15~+0.15
    -0.09
    Flexural strength（24 day）
    ≥2.0
    2.7
    Compressive strength（24 day）
    ≥6.0
    7.6
    Flexural strength（28 day）
    ≥4.0
    4.1
    Compressive strength（28 day）
    ≥16.0
    16.4

    Notes

    1.The application temperature is 5~35℃,and you should familiarize yourself with the overall applicationprocess before application. Note that in direct sunlight, strong wind blowing and other circumstances may appear grout surface drying too quickly.
    2.    In order to achieve the best application effect, the base layer should be clean, oil-free, dust-free, free ofpollutants or isolation materials
    3.    Add water according to the prescribed ratio, mechanically mix for 1-2 minutes, cure for 3 minutes, thenstir again for 1-2 minutes before pouring onto the ground for construction;
    4.    It can be applied in a thickness over 5-10mm.
    5.    Install isolation buffer sponge strips around perimeter walls during construction to minimize stresscracking caused by contact between the self-leveling compound and the walls.
    6.    The original sealed product is stored in a dry, cool and ventilated environment and has a shelf life of 9months under normal storage and transportation conditions. Do not freeze.

  • Customer Reviews
    No comments
BACK